What problems will make the automatic solder machine solder bad?
This problem is really a headache for both entrepreneurs and manufacturers. Automatic soldering machine is a new thing, so many problems are in many ways, even many manufacturers themselves can’t tell the difference. However, the automatic soldering machine is a very important machine for the majority of electronics manufacturers. It can not only improve the production efficiency but also save the money that the enterprise pays for the labor. In the ordinary life, we must pay attention to the automatic soldering machine. Maintenance and maintenance work can bring greater benefits to the company.
The automatic soldering machine should not be too saturated when working, and the tin point is too large to be easily disconnected from the adjacent solder joints. Moreover, do not save too much tin when working in the automatic soldering machine, which will often lead to virtual soldering. It is not allowed to store the soldering iron mouth on the sponge after cleaning on the sponge. The sponge needs to maintain a certain amount of water. Try to make the sponge as complete. Every day is wet, you should clean the soldering iron mouth when you pick up the soldering iron.
If the automatic soldering machine is used, the AC contactor is not connected properly, that is, the grid voltage is too low, and the customer should quickly solve the power problem at this time, and the power can be used after the power is normal. However, if the newly purchased automatic soldering machine has major component quality problems, you can directly replace the new automatic soldering machine or replace the main part. The automatic soldering machine is guaranteed for one year and provides long-term maintenance services.
